Partner and Seal
processing
You should himself approximately over the style direction of colour
and examination of your new before the wallpaper purchase
walls being clear. The gigantic supply seems often confusing sooner. If you should not quite trust the pictures on your monitor, you can order
model sections from us. Then you can also make itself a picture with it over the surface-nature of the wallpapers. Papering very complicated rooms, primarily if you obtained costly
wall covering from us, have, you prefer to leave to the expert.
In the normal case this economizes selfmade but a lot of money and makes fun. The purest feeling of success is wallcovering.
You should pay attention to the following things:
Tools
The right tool essential has to be obtained around a perfect paper-hanger result. Needing you:- Pinch roller
- Spatula
- Plumb
- Cutter knife
- Inch rule
- Paper-hanger scissors
- Paper-hanger spatula
- Paste brush
- Paper-hanger brush
- Paste bucket
- Pencil
- Trestle table (possible lends)
- Seam scooter (conical)
- Paper-hanger knife
- Edges cutting bar
- Ladder
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
You should great intend and wants to paper, the acquisition of a paste machine is worth-while once in a while. She makes easier and
accelerates the work immensely.
Determination of demand
The needed roles must be calculated before the purchase of a wallpaper. At too few rolls of wallpaper wallpapers often bought later aren't deliverable from the same production, so that himself, any more at different productions difference in colour and structure can make noticeable on a wall area. Therefore you pay attention absolutely to the same making numbers at the purchase.
Number of the roles at a ceiling height at meters |
Ceiling |
|||
Space size |
2,10 - 2,35 |
2,40 - 3,05 |
3,10 - 4,00 |
Number of |
6 |
3 |
4 |
5 |
1 |
10 |
5 |
7 |
9 |
2 |
12 |
6 |
8 |
11 |
2 |
15 |
8 |
10 |
14 |
3 |
18 |
9 |
12 |
17 |
4 |
20 |
10 |
14 |
19 |
5 |
24 |
12 |
16 |
23 |
7 |
Humidity
Damp places can be often recognized by hand of the dark change in colour of the surface. Darker areas, moulds or stick spots shows more dampness. Undergrounds must be dryly at the time of the paper-hanger work.
Surface strength
The surface at moderate pressure with a hard object is damaged or burst, the surface is too soft. The loose area not able to take a load should be removed and repaired. Are old chalk touches to wash up thoroughly.
Sucking ability
The sucking behaviour can be checked by wetting with water. If the water sparkles off, the underground sucking not or only weakly is available. Sub-reasons sucking not or weakly can sharpened or leach become. Sticking a role waste paper recommends himself at higher-order wallpapers. If the sucking ability is too high, the underground takes the water fast and immediately shows a clear dark change in colour. These sub-reasons are with a suitable coating to shake out.
Cleanness
The cleanness of the underground is also a prerequisite for complaint open paper-hangers. Can impair the paper-hanger work faultings, greases or similar. You have to be removed with suitable cleaning agents. The complete remove also is part of the clean underground of old wallpapers.
Paste
The adhesives must be coordinated with the wall covering, the sticking method and the underground. Only the adhesive which is necessary due to the wallpaper quality should be used. It is always calculated with cold, clean water. Warm water wouldn't unlock the cellulose which would have paste left thinly and watery. Please, calculate the paste absolutely according to handicap of the manufacturer. A thinning down the paste can lead to reduced adhesive strength.
Cutting the strip of wallpaper to size
For a visually good paper-hanger work measuring rightly and cutting to size is prerequisite for the strips of wallpaper. The wallpaper is rolled up so that the printed page is visible on the trestle table. Check the wallpapers on possible visible faults since the manufacturer doesn't take on any sticking costs at a complaint. Please, for a complaint keep the one putting pieces of paper and faulty roles. Cut the length to size according to the ceiling height plus a bonus of 5 -10 cm. With the bonus possible height arguments are compensated for. They take absolutely the pattern report which requires greater addition under circumstances into account. The length are evenly to paste. The wallpaper paper must to one pastes give way after this. This event is particularly important for a tight bonding without bubbles and folds. For softening evenly one folds the strips of wallpaper. At this the length are put on top of each other in bulk from the two sides and rolled up without folding loosely. Depending on quality and paper weight the soak times are different. The paper should feel supple. Pay attention with all lengths to the same soak times. As a rule, soak times of approx. 5 -12 minutes suffice. Please, notice the details of the manufacturers.
Processing paper-backing wallpaper
Papering with paper-backing wallpapers requires circumspect procedure which starts with plumbing the first length. To control and for longer walls
recommends a after-plumb, as well in every new space corner.
Most wallpapers are stuck on push. The edges hardly push bluntly so thick a seam visibly is to each other, this. Slight corrections at the seam can
by careful push and shove execute. They push the lengths bubble freely with a paper-hanger brush to the wall. Immediately dabbing well-worn paste spots
with clear water and a soft cloth. A whole strip of wallpaper should never become it stuck by inside corners otherwise arise folds and hollow places.
They stick the track only 2 cm for and to press on around the corner, possible crossways cut repeatedly. The rest of the length is calculated exactly
in the corner plumbed newly. They pay attention to the possible model attempt at this.
Processing non-woven wallpaper
One finds more wallpapers in the sample collections with a strap material from fleece always. This new generation of the wall covering particularly simply can be processed. The wallpapers are rip bridging, dimension stable and be able to remove at the renovation completely dryly. To be taken care has on an colour uniform bright underground since the strap material isn't look thick and colour differences still can be visible in underground after papering. The special paste is inserted on the wall found and the dry strip of wallpaper into glue bed directly. Leaving paste has to be immediately taken with a clean cloth. The lengths have to be stuck together continuous. Also to paste on the backing side is possible. In this case the wallpaper is stuck together without soak time. Non-woven wallpapers are completely dryly deductible at the next renovation. The length is solved and removed with an even length at the waiter or bottom edge by the underground. The underground isn't damaged and for the next paper-hanging prepared.















